 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optoway SPS-2120G / SPS-2120BG / SPS-2120AG 10.3 Gb/s / 20 km / 1310 nm SFP+ LC SINGLE-MODE TRANSCEIVER FEATURES DESCRIPTION SPS-2120G 1 *********************************************************************************************************************************************************************** (RoHS Compliant) *********************************************************************************************************************************************************************** l l l l l l l l l l l l l Up to 10.5 Gb/s Bi-directional Data Links Complaint with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-LR Compliant to IEEE 802.3ae 10GBASE-LW 1310 nm DFB LD Transmitter AC/AC Coupling according to MSA Distance up to 20 km at SM Fiber Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operating: SPS-2120G -10 to 85oC Operating: SPS-2120BG -40 to 85oC Operating: SPS-2120AG Class 1 Laser International Safety Standard IEC-60825 Compliant The SPS-2120G series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW. It is with the SFP+ 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a 1310 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l High-speed Storage Area Networks l Computer Cluster Cross-connect l Custom High-speed Data Pipes ORDER INFORMATION P/No. Bit Rate (Gb/s) 10.3 10.3 10.3 10GBASE LR / LW LR / LW LR / LW Distance (km) 20 20 20 Wavelength (nm) 1310 DFB 1310 DFB 1310 DFB Package LC SFP+ LC SFP+ LC SFP+ Temp. (oC) 0 to 70 -10 to 85 -40 to 85 RoHS Compliant Yes Yes Yes SPS-2120G SPS-2120BG SPS-2120AG Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Symbol Tstg Topr Min -40 0 -10 -40 -0.5 Max 85 70 85 85 3.6 Units o C o C Notes SPS-2120G SPS-2120BG SPS-2120AG Power Supply Voltage Vcc V Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Symbol Vcc Topr Min 3.13 0 -10 -40 Typ 3.3 Max 3.47 70 85 85 330 10.5 Units / Notes V o C / SPS-2120G o C / SPS-2120BG o C / SPS-2120AG mA Gb/s Power Supply Current Data Rate ICC (TX+RX) 260 10.3125 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Optical Modulation Amplitude Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, Avg Po, OMA c SMSR ER RIN Min -3 -3.5 1290 30 3.5 -128 -30 Typ Max 1 1330 1 Units dBm dBm nm nm dB dB/Hz dBm 1310 SPS-2120G Notes 1 2 *********************************************************************************************************************************************************************** -20 dB width 1. Output power is power coupled into a 9/125 m single-mode fiber. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Sensitivity Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Optical Return Loss Symbol Sen P MAX LOSD LOSA c ORL Min 1 ---30 1260 Typ ------Max -14.4 -18 --1565 -12 Units dBm dBm dBm dBm nm dB Notes 2, average received power Transition: low to high Transition: high to low 2. Measured with worst ER; BER < 10-12 and PRBS 2 31-1 at 10.3125 Gb/s.. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min Typ 10.3125 100 150 10.3125 100 600 Max 10.5 1200 10.5 700 Units Gb/s mVpp Gb/s mVpp Notes Internally AC coupled 400 Internally AC coupled 2.0 GND 2.4 GND Vcc+0.3 0.8 Vcc 0.5 V V V V ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway CONNECTION DIAGRAM SPS-2120G 3 *********************************************************************************************************************************************************************** PIN Signal Name 1 2 VEET TX_Fault Description Transmitter Signal Ground Transmitter Fault Indication. Logic "1" Output = Laser Fault. Logic "0" Output = Normal Operation Logic "1" Input (or no connection) = Laser off, Logic "0" = Laser on. Modulation Definition 2 - Two wires serial ID Interface Modulation Definition 1 - Two wires serial ID Interface Modulation Definition 0 - Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground PIN Signal Name 11 12 VEER RD- Description Receiver Signal Ground Inverse Receiver Data Out 3 4 5 6 7 TX_Disable SDA SDL MOD-ABS RS0 13 14 15 16 17 RD+ VEER VCCR VCCT VEET Receiver Data Out Receiver Signal Ground Receiver Power - 3.3V5% Transmitter Power - 3.3V5% Transmitter Signal Ground 8 9 RX_LOS RS1 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 10 VEER 20 VEET Transmitter Signal Ground Module Definition Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 2 10 K TD + 18 Z=50 TD 19 Z=50 Vcc T 16 0.1F 4 .7 H Vcc 3.3V 22 F 0.1F 0.1F Vcc R 15 0.1F 22 F 4 .7 H TD TD + Tx_DISABLE Tx_FAULT SPS-2120G 4 *********************************************************************************************************************************************************************** LD D river 100 SerDes IC Protocol IC RD - 12 Z=50 100 RD - POST Amp RD + 13 Z=50 10 K RD + depending on SE D S RE LOSS OF SINGAL LOS Vee R RS1 30K 30K MOD_ABS RS0 8 ( 10,11,14) 9 7 TX Rate Select RX Rate Select 6 5 4 10 K 10 K 10 K Vcc 3.3V MODU LE DETECT SCL SDA EEPROM SCL SDA SFP+ module PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2007/12/1 V2.0 Optoway Revision History Version 1.0 2.0 Initial datasheet Add SPS-2120AG for -40 to 85oC SPS-2120G 5 *********************************************************************************************************************************************************************** Subject Release Date 2007/10/1 2007/12/1 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2007/12/1 V2.0 |
Price & Availability of SPS-2120AG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |